Difference between revisions of "Laser Materials and Settings"

From Narwhal Lab's Wiki!
Jump to navigation Jump to search
Line 45: Line 45:
 
| style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood
 
| style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood
 
| style="width: 68px;" data-mce-style="width: 68px;"|9
 
| style="width: 68px;" data-mce-style="width: 68px;"|9
| style="width: 101px;" data-mce-style="width: 101px;"|Cut
+
| style="width: 101px;" data-mce-style="width: 101px;"|Line
 
| style="width: 75px;" data-mce-style="width: 75px;"|95
 
| style="width: 75px;" data-mce-style="width: 75px;"|95
 
| style="width: 102px;" data-mce-style="width: 102px;"|10
 
| style="width: 102px;" data-mce-style="width: 102px;"|10

Revision as of 14:54, 6 July 2020

Narwhal Labs Laser Material and Settings Library

A library of known materials and laser settings that have been tested to work at Narwhal Labs on a Thunder Laser Nova 35 100W CO2 Laser Cutter and Engraver. Settings are not guaranteed to work and should be considered a baseline. Please add to or update this page if you test a new known material. Please obey all safety protocols listed on our main laser information page.

Material Thickness Cut/Fill/Image Power (%) Speed (mm/s) Passes Notes
Ozark Trail Tumbler NA Image 40 300 1 Requires clean up
Baltic Birch Plywood 6mm Fill 25 100 1 Dark/deep image. Can dial back.
Baltic Birch Plywood 6mm Line 60 15 2 Mostly cut through with some areas that need to be trimmed with a razor
Baltic Birch Plywood 6mm Line 20 200 1 Good quality line engraving
Baltic Birch Plywood 9 Line 95 10 1 Should be a complete cut with proper focus. Work piece should be a few mm closer to the cutting head than auto focus distance.
Glass NA Fill 20 300 1 Shallow engraving, clear image
Glass NA   50 800 1 Shallow engraving, clear image
Paper Micarta 4.45mm Cut 60 15 1 Complete cut. Residue at cut edge can be cleaned easily with acetone / alcohol mix.