Difference between revisions of "Laser Materials and Settings"
Jump to navigation
Jump to search
| Line 45: | Line 45: | ||
| style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | | style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | ||
| style="width: 68px;" data-mce-style="width: 68px;"|9 | | style="width: 68px;" data-mce-style="width: 68px;"|9 | ||
| − | | style="width: 101px;" data-mce-style="width: 101px;"| | + | | style="width: 101px;" data-mce-style="width: 101px;"|Line |
| style="width: 75px;" data-mce-style="width: 75px;"|95 | | style="width: 75px;" data-mce-style="width: 75px;"|95 | ||
| style="width: 102px;" data-mce-style="width: 102px;"|10 | | style="width: 102px;" data-mce-style="width: 102px;"|10 | ||
Revision as of 14:54, 6 July 2020
Narwhal Labs Laser Material and Settings Library
A library of known materials and laser settings that have been tested to work at Narwhal Labs on a Thunder Laser Nova 35 100W CO2 Laser Cutter and Engraver. Settings are not guaranteed to work and should be considered a baseline. Please add to or update this page if you test a new known material. Please obey all safety protocols listed on our main laser information page.
| Material | Thickness | Cut/Fill/Image | Power (%) | Speed (mm/s) | Passes | Notes |
| Ozark Trail Tumbler | NA | Image | 40 | 300 | 1 | Requires clean up |
| Baltic Birch Plywood | 6mm | Fill | 25 | 100 | 1 | Dark/deep image. Can dial back. |
| Baltic Birch Plywood | 6mm | Line | 60 | 15 | 2 | Mostly cut through with some areas that need to be trimmed with a razor |
| Baltic Birch Plywood | 6mm | Line | 20 | 200 | 1 | Good quality line engraving |
| Baltic Birch Plywood | 9 | Line | 95 | 10 | 1 | Should be a complete cut with proper focus. Work piece should be a few mm closer to the cutting head than auto focus distance. |
| Glass | NA | Fill | 20 | 300 | 1 | Shallow engraving, clear image |
| Glass | NA | 50 | 800 | 1 | Shallow engraving, clear image | |
| Paper Micarta | 4.45mm | Cut | 60 | 15 | 1 | Complete cut. Residue at cut edge can be cleaned easily with acetone / alcohol mix. |
