Difference between revisions of "Laser Materials and Settings"
Jump to navigation
Jump to search
| (2 intermediate revisions by the same user not shown) | |||
| Line 45: | Line 45: | ||
| style="width: 68px;" data-mce-style="width: 68px;"|6mm | | style="width: 68px;" data-mce-style="width: 68px;"|6mm | ||
| style="width: 101px;" data-mce-style="width: 101px;"|Fill | | style="width: 101px;" data-mce-style="width: 101px;"|Fill | ||
| − | | style="width: 75px;" data-mce-style="width: 75px;"| | + | | style="width: 75px;" data-mce-style="width: 75px;"|20 |
| − | | style="width: 102px;" data-mce-style="width: 102px;"| | + | | style="width: 102px;" data-mce-style="width: 102px;"|400 |
| style="width: 47px;" data-mce-style="width: 47px;"|1 | | style="width: 47px;" data-mce-style="width: 47px;"|1 | ||
| − | | style="width: 186px;" data-mce-style="width: 186px;"| | + | | style="width: 186px;" data-mce-style="width: 186px;"|Light engraving |
|- | |- | ||
| style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | | style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | ||
| style="width: 68px;" data-mce-style="width: 68px;"|6mm | | style="width: 68px;" data-mce-style="width: 68px;"|6mm | ||
| style="width: 101px;" data-mce-style="width: 101px;"|Line | | style="width: 101px;" data-mce-style="width: 101px;"|Line | ||
| − | | style="width: 75px;" data-mce-style="width: 75px;"| | + | | style="width: 75px;" data-mce-style="width: 75px;"|85 |
| − | | style="width: 102px;" data-mce-style="width: 102px;"| | + | | style="width: 102px;" data-mce-style="width: 102px;"|10 |
| − | | style="width: 47px;" data-mce-style="width: 47px;"| | + | | style="width: 47px;" data-mce-style="width: 47px;"|1 |
| − | | style="width: 186px;" data-mce-style="width: 186px;"| | + | | style="width: 186px;" data-mce-style="width: 186px;"|Glue spots/voids do not cut through |
|- | |- | ||
| style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | | style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | ||
| Line 87: | Line 87: | ||
|'''Notes''' | |'''Notes''' | ||
|- | |- | ||
| − | |Acrylic - factory masked on both sides | + | |Cast Acrylic - factory masked on both sides |
|1/8” | |1/8” | ||
|Line | |Line | ||
| − | | | + | |50 |
|20 | |20 | ||
|1 | |1 | ||
| − | |Excellent cut quality, | + | |Excellent cut quality |
| + | |- | ||
| + | |Cast Acrylic - Remove top masking | ||
| + | |NA | ||
| + | |Fill | ||
| + | |15 | ||
| + | |400 | ||
| + | |1 | ||
| + | |Good light etching, focus must be perfect | ||
| + | |- | ||
| + | |Cast Acrylic - factory masked on both sides | ||
| + | |3/8" | ||
| + | |Line | ||
| + | |80 | ||
| + | |10 | ||
| + | |2 | ||
| + | |Unable to cut in a single pass | ||
|- | |- | ||
| − | | | + | |Cast Acrylic - factory masked on both sides |
| − | | | + | |1/4" |
| − | | | + | |Line |
| − | | | + | |60 |
| − | | | + | |10 |
| − | | | + | |1 |
| − | | | + | |Excellent cut quality, may want to move focus to middle of cut. |
|- | |- | ||
| − | | | + | |ABS |
| − | | | + | |1/4" |
| − | | | + | |Line |
| − | | | + | |85 |
| − | | | + | |10 |
| − | | | + | |1 |
| − | | | + | |Good cut quality. Slight burr on bottom edge. |
|} | |} | ||
Latest revision as of 20:44, 29 June 2021
Contents
Narwhal Labs Laser Material and Settings Library
A library of known materials and laser settings that have been tested to work at Narwhal Labs on a Thunder Laser Nova 35 100W CO2 Laser Cutter and Engraver. Settings are not guaranteed to work and should be considered a baseline. Please add to or update this page if you test a new known material. Please obey all safety protocols listed on our main laser information page.
Never Ever Cut These Things
| Material | Also Known As | Reason |
| PVC | Poly Vinyl Chloride, Sintra, Oracal Vinyl, Pleather | Emits deadly chlorine gas, corrodes machine internals |
| Rubber | Smells like a tire fire. Potential cyanide gas. | |
| Polypropylene | Melty plastic mess | |
| Carbon Plate | Melty mess | |
| Unknown | Anything you don't know the composition of | Risk of fire, damage, injury or death. |
Wood
| Material | Thickness | Line/Fill/Image | Power (%) | Speed (mm/s) | Passes | Notes |
| Baltic Birch Plywood | 6mm | Fill | 20 | 400 | 1 | Light engraving |
| Baltic Birch Plywood | 6mm | Line | 85 | 10 | 1 | Glue spots/voids do not cut through |
| Baltic Birch Plywood | 6mm | Line/fill | 20 | 400 | 1 | Good quality line and raster engraving |
| Baltic Birch Plywood | 9mm | Line | 95 | 10 | 1 | Should be a complete cut with proper focus. Work piece should be a few mm closer to the cutting head than auto focus distance. NOT EXTERIOR GRADE |
Plastics
| Material | Thickness | Line/Fill/Image | Power (%) | Speed (mm/s) | Passes | Notes |
| Cast Acrylic - factory masked on both sides | 1/8” | Line | 50 | 20 | 1 | Excellent cut quality |
| Cast Acrylic - Remove top masking | NA | Fill | 15 | 400 | 1 | Good light etching, focus must be perfect |
| Cast Acrylic - factory masked on both sides | 3/8" | Line | 80 | 10 | 2 | Unable to cut in a single pass |
| Cast Acrylic - factory masked on both sides | 1/4" | Line | 60 | 10 | 1 | Excellent cut quality, may want to move focus to middle of cut. |
| ABS | 1/4" | Line | 85 | 10 | 1 | Good cut quality. Slight burr on bottom edge. |
Other
| Material | Thickness | Cut/Fill/Image | Power (%) | Speed (mm/s) | Passes | Notes |
| Paper Micarta | 4.45mm | Line | 60 | 15 | 1 | Complete cut. Residue at cut edge can be cleaned easily with acetone / alcohol mix. |
| Ozark Trail Tumbler | NA | Image | 40 | 300 | 1 | Requires clean up with acetone/alcohol mix. |
| Glass | NA | Image/Fill | 50 | 800 | 1 | Good quality etching |
