Difference between revisions of "Laser Materials and Settings"
Jump to navigation
Jump to search
(→Wood) |
|||
| Line 45: | Line 45: | ||
| style="width: 68px;" data-mce-style="width: 68px;"|6mm | | style="width: 68px;" data-mce-style="width: 68px;"|6mm | ||
| style="width: 101px;" data-mce-style="width: 101px;"|Fill | | style="width: 101px;" data-mce-style="width: 101px;"|Fill | ||
| − | | style="width: 75px;" data-mce-style="width: 75px;"| | + | | style="width: 75px;" data-mce-style="width: 75px;"|20 |
| − | | style="width: 102px;" data-mce-style="width: 102px;"| | + | | style="width: 102px;" data-mce-style="width: 102px;"|400 |
| style="width: 47px;" data-mce-style="width: 47px;"|1 | | style="width: 47px;" data-mce-style="width: 47px;"|1 | ||
| − | | style="width: 186px;" data-mce-style="width: 186px;"| | + | | style="width: 186px;" data-mce-style="width: 186px;"|Light engraving |
|- | |- | ||
| style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | | style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | ||
| style="width: 68px;" data-mce-style="width: 68px;"|6mm | | style="width: 68px;" data-mce-style="width: 68px;"|6mm | ||
| style="width: 101px;" data-mce-style="width: 101px;"|Line | | style="width: 101px;" data-mce-style="width: 101px;"|Line | ||
| − | | style="width: 75px;" data-mce-style="width: 75px;"| | + | | style="width: 75px;" data-mce-style="width: 75px;"|85 |
| − | | style="width: 102px;" data-mce-style="width: 102px;"| | + | | style="width: 102px;" data-mce-style="width: 102px;"|10 |
| − | | style="width: 47px;" data-mce-style="width: 47px;"| | + | | style="width: 47px;" data-mce-style="width: 47px;"|1 |
| − | | style="width: 186px;" data-mce-style="width: 186px;"| | + | | style="width: 186px;" data-mce-style="width: 186px;"|Glue spots/voids do not cut through |
|- | |- | ||
| style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | | style="width: 139px;" data-mce-style="width: 139px;"|Baltic Birch Plywood | ||
Revision as of 17:42, 25 November 2020
Contents
Narwhal Labs Laser Material and Settings Library
A library of known materials and laser settings that have been tested to work at Narwhal Labs on a Thunder Laser Nova 35 100W CO2 Laser Cutter and Engraver. Settings are not guaranteed to work and should be considered a baseline. Please add to or update this page if you test a new known material. Please obey all safety protocols listed on our main laser information page.
Never Ever Cut These Things
| Material | Also Known As | Reason |
| PVC | Poly Vinyl Chloride, Sintra, Oracal Vinyl, Pleather | Emits deadly chlorine gas, corrodes machine internals |
| Rubber | Smells like a tire fire. Potential cyanide gas. | |
| Polypropylene | Melty plastic mess | |
| Carbon Plate | Melty mess | |
| Unknown | Anything you don't know the composition of | Risk of fire, damage, injury or death. |
Wood
| Material | Thickness | Line/Fill/Image | Power (%) | Speed (mm/s) | Passes | Notes |
| Baltic Birch Plywood | 6mm | Fill | 20 | 400 | 1 | Light engraving |
| Baltic Birch Plywood | 6mm | Line | 85 | 10 | 1 | Glue spots/voids do not cut through |
| Baltic Birch Plywood | 6mm | Line/fill | 20 | 400 | 1 | Good quality line and raster engraving |
| Baltic Birch Plywood | 9mm | Line | 95 | 10 | 1 | Should be a complete cut with proper focus. Work piece should be a few mm closer to the cutting head than auto focus distance. NOT EXTERIOR GRADE |
Plastics
| Material | Thickness | Line/Fill/Image | Power (%) | Speed (mm/s) | Passes | Notes |
| Cast Acrylic - factory masked on both sides | 1/8” | Line | 50 | 20 | 1 | Excellent cut quality |
| Cast Acrylic - Remove top masking | NA | Fill | 15 | 400 | 1 | Good light etching, focus must be perfect |
| Cast Acrylic - factory masked on both sides | 3/8" | Line | 80 | 10 | 2 | Unable to cut in a single pass |
| Cast Acrylic - factory masked on both sides | 1/4" | Line | 60 | 10 | 1 | Excellent cut quality, may want to move focus to middle of cut. |
Other
| Material | Thickness | Cut/Fill/Image | Power (%) | Speed (mm/s) | Passes | Notes |
| Paper Micarta | 4.45mm | Line | 60 | 15 | 1 | Complete cut. Residue at cut edge can be cleaned easily with acetone / alcohol mix. |
| Ozark Trail Tumbler | NA | Image | 40 | 300 | 1 | Requires clean up with acetone/alcohol mix. |
| Glass | NA | Image/Fill | 50 | 800 | 1 | Good quality etching |
