Difference between revisions of "CNC Machining"
| Line 1: | Line 1: | ||
=='''CNC Machining at Narwhal Labs'''== | =='''CNC Machining at Narwhal Labs'''== | ||
| + | |||
| + | ===What is CNC?=== | ||
| + | CNC is an abbreviation for "Computer Numerical Control". Using "g-code", machines use coordinate-based commands to move and perform tasks. While many tools at Narwhal Labs use CNC technology such as our laser cutter, vinyl cutters, and 3D printers, CNC will most often refer to CNC routers and milling machines. Designs are created using CAD (Computer Aided Design) software and code to run the machines is generated using CAM (Computer Aided Manufacturing) software.<br /> | ||
==='''Our CNC Routers and Equipment'''=== | ==='''Our CNC Routers and Equipment'''=== | ||
| − | + | ||
| + | Narwhal Labs is equipped with an AvidCNC PRO2448 CNC router with a 2.2kW (3HP) spindle, a NEMA34 electronics package, proximity sensors, a corner finding touch plate, mach 4 control software, and a complement of tools and tooling courtesy of AvidCNC and Bits&Bits. | ||
===AvidCNC Cycle Start Checklist=== | ===AvidCNC Cycle Start Checklist=== | ||
| Line 20: | Line 24: | ||
* Please work with staff if you need to do long (1+hr) operations on a CNC. | * Please work with staff if you need to do long (1+hr) operations on a CNC. | ||
* CNC routers, even with dust collection, can throw dust and chips. Please be considerate of others that may be near by or that may be doing epoxy or finish work that is negatively affected by dust | * CNC routers, even with dust collection, can throw dust and chips. Please be considerate of others that may be near by or that may be doing epoxy or finish work that is negatively affected by dust | ||
| − | * Use ample workholding and tabs in your programs. Flying parts can be dangerous to you and those around you | + | * Use ample workholding and tabs in your programs. Flying parts can be dangerous to you and those around you. |
| − | * Please inform staff of any broken tools/tooling or machine faults so we can keep things running for all members. | + | * Please inform staff of any broken tools/tooling or machine faults so we can keep things running for all members. You will not be penalized for accidents. |
===Software=== | ===Software=== | ||
| Line 30: | Line 34: | ||
| − | While Narwhal Labs does not endorse any specific | + | While Narwhal Labs does not endorse any specific CAD or CAM software package, our staff has some experience with Autodesk Fusion 360 and vCarve Pro and may be able to help you with this software if needed. Fusion 360 is a full-featured CAD and CAM package that is free for personal and education use. |
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 41: | Line 45: | ||
|AutoDesk Fusion 360 | |AutoDesk Fusion 360 | ||
|[https://www.autodesk.com/products/fusion-360/personal https://www.autodesk.com/products/fusion-360/personal] | |[https://www.autodesk.com/products/fusion-360/personal https://www.autodesk.com/products/fusion-360/personal] | ||
| + | |} | ||
| + | All CAM software and packages require a "Post-Processor" to generate code that our machines will understand. The latest post-processors for vCarve and Fusion can be found below. | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | |Software | ||
| + | |Post Processor | ||
| + | |- | ||
| + | |vCarve Pro | ||
| + | |[https://www.cncrouterparts.com/support/software/downloads/vectric/ https://www.cncrouterparts.com/support/software/downloads/vectric/] | ||
| + | |- | ||
| + | |AutoDesk Fusion 360 | ||
| + | |[https://www.cncrouterparts.com/support/software/downloads/fusion/ https://www.cncrouterparts.com/support/software/downloads/fusion/] | ||
| + | |- | ||
| + | |SheetCAM | ||
| + | |[https://www.cncrouterparts.com/support/software/downloads/sheetcam/ https://www.cncrouterparts.com/support/software/downloads/sheetcam/] | ||
|} | |} | ||
===Feeds and Speeds=== | ===Feeds and Speeds=== | ||
| − | Feeds and speeds refers to the feed rate, spindle speed, and plunge depth of your CNC program for a specific bit. | + | Feeds and speeds refers to the feed rate, spindle speed, and plunge depth of your CNC program for a specific bit. We maintain a list of suggested feeds and speeds for specific materials and tooling at the page linked below.<br />'''''Main article:''''' [[CNC Feeds_and_Speeds|CNC Router Feeds and Speeds]] |
Revision as of 16:34, 9 July 2020
Contents
CNC Machining at Narwhal Labs
What is CNC?
CNC is an abbreviation for "Computer Numerical Control". Using "g-code", machines use coordinate-based commands to move and perform tasks. While many tools at Narwhal Labs use CNC technology such as our laser cutter, vinyl cutters, and 3D printers, CNC will most often refer to CNC routers and milling machines. Designs are created using CAD (Computer Aided Design) software and code to run the machines is generated using CAM (Computer Aided Manufacturing) software.
Our CNC Routers and Equipment
Narwhal Labs is equipped with an AvidCNC PRO2448 CNC router with a 2.2kW (3HP) spindle, a NEMA34 electronics package, proximity sensors, a corner finding touch plate, mach 4 control software, and a complement of tools and tooling courtesy of AvidCNC and Bits&Bits.
AvidCNC Cycle Start Checklist
- Locate the emergency stop
- Home all axis on the machine
- Confirm material dimensions
- Preview toolpaths/Run simulations
- Secure workholding
- Check router bit installation
- Verify work coordinate system (WCS)
- Review Mach 4 & G-code
- Test the spindle
- Re-install dust shoe
CNC Router Etiquette
- CNC routers can be very loud and make unpleasant sounds. Check with others in the room before running
- Please work with staff if you need to do long (1+hr) operations on a CNC.
- CNC routers, even with dust collection, can throw dust and chips. Please be considerate of others that may be near by or that may be doing epoxy or finish work that is negatively affected by dust
- Use ample workholding and tabs in your programs. Flying parts can be dangerous to you and those around you.
- Please inform staff of any broken tools/tooling or machine faults so we can keep things running for all members. You will not be penalized for accidents.
Software
Our CNC router operates on Mach 4 control software.
We also have a license of vCarve pro that is located and running on our main laptop for the CNC router. You can use the free trial version of vCarve Pro on your personal computer or a Narwhal Labs loaner laptop to do all design and CAM work, then use the CNC laptop on-site here to export your G-code. The free trial enables all features except G-code export and has no time restrictions.
While Narwhal Labs does not endorse any specific CAD or CAM software package, our staff has some experience with Autodesk Fusion 360 and vCarve Pro and may be able to help you with this software if needed. Fusion 360 is a full-featured CAD and CAM package that is free for personal and education use.
| Software | Link |
| vCarve Pro | https://www.vectric.com/products/vcarve-pro |
| AutoDesk Fusion 360 | https://www.autodesk.com/products/fusion-360/personal |
All CAM software and packages require a "Post-Processor" to generate code that our machines will understand. The latest post-processors for vCarve and Fusion can be found below.
| Software | Post Processor |
| vCarve Pro | https://www.cncrouterparts.com/support/software/downloads/vectric/ |
| AutoDesk Fusion 360 | https://www.cncrouterparts.com/support/software/downloads/fusion/ |
| SheetCAM | https://www.cncrouterparts.com/support/software/downloads/sheetcam/ |
Feeds and Speeds
Feeds and speeds refers to the feed rate, spindle speed, and plunge depth of your CNC program for a specific bit. We maintain a list of suggested feeds and speeds for specific materials and tooling at the page linked below.
Main article: CNC Router Feeds and Speeds
