Laser Materials and Settings

From Narwhal Lab's Wiki!
Revision as of 17:40, 29 April 2020 by Jeffs (talk | contribs) (new page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Narwhal Labs Laser Material and Settings Library

A library of known materials and laser settings that have been tested to work at Narwhal Labs on a Thunder Laser Nova 35 100W CO2 Laser Cutter and Engraver. Settings are not guaranteed to work and should be considered a baseline. Please add to or update this page if you test a new known material. Please obey all safety protocols listed on our main laser information page.

Material Thickness Cut/Fill/Image Power (%) Speed (mm/s) Passes
Ozark Trail Tumbler NA Image 40 300 1